Marie Jay's Metal Products Co., Ltd
Model No.: 20171214002
Gaya: Alat Universal
Struktur: Jenis Getaran
Proses pemotongan: Menghidupkan Alat
Jenis Kerja: Kerja Luar
Menghidupkan Jenis Alat: Lain-lain
Jenis Alat Membosankan: Lain-lain
Jenis Pemotong Pengilangan: Lain-lain
Trade Term: CIF/FOB/EXW Etc
Chemical Composition: WC+CO
Virgin Material: 100%
Usage: Turning,milling And Pilling
Tial Order: Acceptable
Pembungkusan: in cartons
Produktiviti: 100000000 pieces per year
Tempat asal: Hunan
Keupayaan bekalan: 100000000 pieces per year
All of our inserts and cutters are manufactured to our specifications using high gradecarbide; they are finely ground to a razor cutting edge with toughness and durability forlong-lasting, smooth cutting in the most dense hardwoods.
The Most Common Types of Woodworking blade with hole
The triangle can be used to process the thread, the square process the outer circle, the round is the shaping knife, which is used to process the arc.
Precautions for tool loading and unloading
1. When cutting the knife, use gasoline or WD40 cleaning agent to clean the chuck and cap.
2, when the blade will chuck into the pressure cap, otherwise the tool is not easy, if not caught in the chuck pressure cap, unloading knife when chuck would clip on the motor shaft can not be unloaded
3.The clamping chuck and selected the former should pay attention to whether or not the matching tool, tool parts.
4.When clamping tools, the part of the tool extension chuck should not be too long, otherwise, it will easily cause vibration in the process and affect the quality of the workpiece surface.
5.When changing the knife, we must ensure that the spindle speed is zero, that is to say, the cutting tool is allowed in the stop state of the spindle, otherwise it is easy to have serious personal injury accidents.
6.If the clamp is used, it is necessary to clean the dust on the press foot and the main shaft with the vacuum cleaner, and then clamp the cutting tool
7.In the process of screwing up the cap, it is necessary to screw the cap to the rotor. First, the hand should be screwed in place without difficulty.
Best cargo storage and logistics packaging solutions
We, Marie Jay's Metal Products Co., Limited, are a professional supplier and manufacturer of tungsten carbide products, suchCarbide inserts, carbide shims, carbide rods, carbide plate and bars, carbide drawing dies,
Carbide endmills, carbide balls, carbide burrs, carbide mining tools, etc.
With several years development, our products have been exported to U. S. A, Germany, Italy, Russia, South America etc. With good quality and competitive prices. Our hard working attitude and responsiveness are approved by our customers. And we would like to establish new business relationships with new customers.
Contact us today and you will enjoy benefits of good quality and services from our products!
Tungsten Carbide Preforms are widely used in wear and die applications
1. We will try our best to reply our customers` requests within 24 hours.
2. Titanium and titanium alloy products:
Titanium Rods, Titanium Tubes, Titanium Pipe Fittings, Titanium Plates, Titanium Sheets, Titanium Foils, Titanium Wires, Titanium Nuts and Bolts, Titanium Brazing and Casting, Cutomized Titanium Products etc.
* We will inspect and test all products after finishing production and before delivery.
* We can provide dimension & inspection certificate as customers' requirements.
* We also can provide customers' samples dimensional verification.
Marie Jay's Metal Products Co., Limited
Tel: +86-731-22130772, 28112392
Address of Our Office:
B402 Chuangxin Building,1 Mingri Road,Tianyuan District, Zhuzhou, Hunan, China
Hakcipta Terpelihara © Marie Jay's Metal Products Co., Ltd 2019 Hakcipta Terpelihara.